What do you breathe

Stain Removal Guide

Combination Greasy & Non-Greasy Stains

Wet Clean/Dry Clean


  1. See "Greasy Stains" and follow Steps 1 through 3.
  2. Rinse and let dry.
  3. Sponge remaining greasy stain with cleaning fluid. (7,6)
  4. Let dry. Repeat if necessary.


  1. Sponge stain with cool water, or drop water onto stain with eye dropper.
  2. If greasy stain remains, sponge with dry cleaning fluid. (7,6) Repeat if necessary.
  3. For final traces, treat with bleach. (1,4)

Cleaning Method

WET CLEAN - Wet Cleaners are liquids, the most important being water.

DRY CLEAN - Dry Cleansers contain no actual moisture, even when in liquid form.

Special Treatments

  1. Chlorine bleach or hydrogen peroxide may be necessary to remove last traces of stain. Mix 1 tsp of bleach and 1 tsp of water. Rinse well. Do not use chlorine on silk, wool, spandex, flame-proofed fabrics, or mohair.
  2. Do not use heat of any kind on stain area until stain is removed, as heat may set the stain.
  3. Dilute alcohol with two parts water if using acetate.
  4. Test in an inconspicuous place first to see if colors or fabric are affected.
  5. Ammonia changes some dyes. Restore by warm water and white vinegar rinse.
  6. Could be poisonous.
  7. Could be flammable.
  8. Dilute ammonia with equal parts of water for silk or wool.
  9. While white vinegar is safe for all fabrics, dyes may change when vinegar is applied. If colors do change, rinse with water and ammonia solution, followed by water rinse.

general services | air duct cleaning | carpet cleaning
home | about gcr | testimonials | stain removal guide | newsletter | contact us
Copyright General Cleaning & Restoration LLC 2003