Stain Removal Guide
- Sponge promptly with cool water.
- If stain is not removed, work liquid detergent into stain.
- Treat with bleach for traces.
(1,4,3) or follow step 1 then sponge with rubbing alcohol. (3,4) Proceed to step 4 (1).
NOTE: Alcoholic beverages sometimes cause dye to run or fade. There is no remedy for this problem.
WET CLEAN - Wet Cleaners are liquids, the most important being water.
DRY CLEAN - Dry Cleansers contain no actual moisture, even when in liquid form.
- Chlorine bleach or hydrogen peroxide may be necessary to remove last traces of stain. Mix 1 tsp of bleach and 1 tsp of water. Rinse well. Do not use chlorine on silk, wool, spandex, flame-proofed fabrics, or mohair.
- Do not use heat of any kind on stain area until stain is removed, as heat may set the stain.
- Dilute alcohol with two parts water if using acetate.
- Test in an inconspicuous place first to see if colors or fabric are affected.
- Ammonia changes some dyes. Restore by warm water and white vinegar rinse.
- Could be poisonous.
- Could be flammable.
- Dilute ammonia with equal parts of water for silk or wool.
- While white vinegar is safe for all fabrics, dyes may change when vinegar is applied. If colors do change, rinse with water and ammonia solution, followed by water rinse.